Status actual CEN standards
Standard | Status development (latest documents) |
EN 1010-1 : 2004 + A1 : 2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1 : Common requirements |
|
EN 1010-2 : 2006 + A1 : 2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2 : Printing and varnishing machines including pre-press machinery |
|
EN 1010-3 : 2002 + A1 : 2009 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 3 : Cutting machines |
|
EN 1010-4 : 2004 + A1 : 2009 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 4 : Bookbinding, paper converting and finishing machines |
|
EN 1010-5 : 2005 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 5 : Machines for the production of corrugated board and machines for the conversion of flat and corrugated board | EN 1010-5 : 2005 FprA1 : 2010 |
EN 1127-1 : 2011 Explosive atmospheres – Explosion prevention and protection – Part 1 : Basic concepts and methodology |
|
EN 1127-2 : 2002 + A1 : 2008 Explosive atmospheres – Explosion prevention and protection – Part 2 : Basic concepts and methodology for mining |
|
EN 1710 : 2005 + A1 : 2008 + C1 : 2010 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
|
EN 1755 : 2000 + A1 : 2009 Safety of industrial trucks – Operation in potentially explosive atmospheres – Use in flammable gas, vapour, mist and dusts |
|
EN 1834-1 : 2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 1 : Group II engines for use in flammable gas and vapour atmospheres |
|
EN 1834-2 : 2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 2 : Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
|
EN 1834-3 : 2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 3 : Group II engines for use in flammable dust atmospheres |
|
EN 1839 : 2003 Determination of explosion limits of gases and vapours | FprEN 1839 : 2011 |
EN 12581 : 2005 + A1 : 2010 Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements |
|
EN 12621 : 2006 + A1 : 2010 Machinery for the supply and circulation of coating materials under pressure – Safety requirements |
|
EN 12757-1 : 2005 + A1 : 2010 Mixing machinery for coating materials – Safety requirements – Part 1 : Mixing machinery for use in vehicle refinishing |
|
EN 13012 : 2001 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers | prEN 13012 : 2010 |
EN 13160-1 : 2003 Leak detection systems : Part 1 : General principles | prEN 13160-1 : 2010 |
EN 13160-2 : 2003 Leak detection systems : Part 2 : Pressure and vacuum systems |
|
EN 13160-3 : 2003 Leak detection systems : Part 3 : Liquid systems for tanks |
|
EN 13160-4 : 2003 Leak detection systems : Part 4 : Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
|
EN 13160-5 : 2003 + C1 : 2007 Leak detection systems : Part 5 : Tank gauge leak detection systems |
|
EN 13160-6 : 2003 Leak detection systems : Part 6 : Sensors in monitoring wells |
|
EN 13160-7 : 2003 Leak detection systems : Part 7 : General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
|
EN 13237 : 2003 Potentially explosive atmospheres – Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres | prEN 13237 : 2011 |
EN 13463-1 : 2009 Non-electrical equipment for use in potentially explosive atmospheres – Part 1 : Basic methods and requirements |
|
EN 13463-2 : 2004 Non-electrical equipment for use in potentially explosive atmospheres – Part 2 : Protection by flow restricting enclosure "fr" |
|
EN 13463-3 : 2005 Non-electrical equipment for use in potentially explosive atmospheres – Part 3 : Protection by flameproof enclosure "d" |
|
EN 13463-5 : 2011 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5 : Protection by constructional safety "c" |
|
EN 13463-6 : 2005 Non-electrical equipment for use in potentially explosive atmospheres – Part 6 : Protection by control of ignition source "b" |
|
EN 13463-8 : 2003 Non-electrical equipment for use in potentially explosive atmospheres – Part 8 : Protection by liquid immersion "k" |
|
EN 13616 : 2004 + C1 : 2006 Overfill prevention for static tanks for liquid petroleum fuels | prEN 13616 : 2010 |
EN 13617-1 : 2004 + A1 : 2009 Petrol filling stations – Part 1 : Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | prEN 13617-1 : 2010 |
EN 13617-2 : 2004 Petrol filling stations – Part 2 : Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers | prEN 13617-2 : 2010 |
EN 13617-3 : 2004 Petrol filling stations – Part 3 : Safety requirements for construction and performance of shear valves |
|
EN 13617-4 : 2004 Petrol filling stations – Part 4 : Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
|
EN 13673-1 : 2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours – Part 1 : Determination of the maximum explosion pressure | Replaced by EN 15967 : 2011 |
EN 13673-2 : 2005 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours – Part 2 : Determination of the maximum rate of explosion pressure rise | Replaced by EN 15967 : 2011 |
EN 13760 : 2003 Automotive LPG filling systems for light and heavy duty vehicles – Nozzle, test requirements and dimensions |
|
EN 13821 : 2002 Potentially explosive atmospheres – Explosion prevention and protection – Determination of minimum ignition energy of dust/air mixtures |
|
EN 13980 : 2002 Potentially explosive atmospheres – Application of quality systems | Replaced by EN IEC/ISO 80079-34 : 2011 |
EN 14034-1 : 2004 + A1 : 2011 Determination of explosion characteristics of dust clouds – Part 1 : Determination of the maximum explosion pressure pmax of dust clouds |
|
EN 14034-2 : 2006 + A1 : 2011 Determination of explosion characteristics of dust clouds – Part 2 : Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
|
EN 14034-3 : 2006 + A1 : 2011 Determination of explosion characteristics of dust clouds – Part 3 : Determination of the lower explosion limit LEL of dust clouds |
|
EN 14034-4 : 2004 + A1 : 2011 Determination of explosion characteristics of dust clouds – Part 4 : Determination of the limiting oxygen concentration LOC of dust clouds |
|
EN 14373 : 2005 Explosion suppression systems |
|
EN 14460 : 2006 Explosion resistant equipment |
|
EN 14491 : 2006 + C2 : 2008 Dust explosion venting protective systems |
|
EN 14492-1 : 2006 + A1 : 2009 + C1 : 2010 Cranes – Power driven winches and hoists – Part 1 : Power driven winches |
|
EN 14492-2 : 2006 + A1 : 2009 + C1 : 2010 Cranes – Power driven winches and hoists – Part 2 : Power driven hoists |
|
EN 14522 : 2005 Determination of the auto ignition temperature of gases and vapours |
|
EN 14591-1 : 2004 + C1: 2006 Explosion prevention and protection in underground mines – Protective systems – Part 1 : 2-bar-explosion proof ventilation structure |
|
EN 14591-2 : 2007 + C1 : 2008 Explosion prevention and protection in underground mines – Protective systems – Part 2 : Passive water trough barriers |
|
EN 14591-4 : 2007 + C1 : 2008 Explosion prevention and protection in underground mines – Protective systems – Part 4 : Automatic extinguishing systems for road headers |
|
EN 14677 : 2008 Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel |
|
EN 14678-1 : 2006 + A1 : 2009 LPG equipment and accessories – Construction and performance of LPG-equipment for automotive filling stations – Part 1 : Dispensers |
|
EN 14678-2 : 2007 LPG equipment and accessories – Equipment for Liquefied Petroleum Gas automotive filling stations – Part 2 : Components other than dispensers, and installation requirements |
|
EN 14681 : 2006 + A1 : 2010 Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
|
EN 14756 : 2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
|
EN 14797 : 2006 Explosion venting devices |
|
EN 14973 : 2006 + A1 : 2008 Conveyor belts for use in underground installations – Electrical and flammability safety requirements |
|
EN 14983 : 2007 Explosion prevention and protection in underground mines – Equipment and protective systems for firedamp drainage |
|
EN 14986 : 2007 Design of fans working in potentially explosive atmospheres |
|
EN 14994 : 2007 Gas explosion venting protective systems |
|
EN 15089 : 2009 Explosion isolation systems |
|
EN 15188 : 2007 Determination of the spontaneous ignition behaviour of dust accumulations |
|
EN 15198 : 2007 Methodology for the risk assessment of non-electrical equipment and components intended for use in potentially explosive atmospheres |
|
EN 15233 : 2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
|
EN 15268 : 2008 Petrol filling stations – Safety requirements for the construction of submersible pump assemblies |
|
CEN/TR 15281 : 2006 Guidance on inerting for the Prevention of Explosions |
|
EN 15794 : 2009 Determination of explosion points of flammable liquids |
|
EN 15967 : 2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours | Replacement for EN 13673-1 : 2003 and EN 13673-2 : 2005 |
EN 16009 : 2011 Flameless explosion venting devices |
|
EN 16020 : 2011 Explosion diverters |
|
EN ISO 16852 : 2010 Flame arresters – Performance requirements, test methods and limits for use |
|
